Author it, Train it, Learn it, Earn it
Back

campus build · BP · business park tier

Business-park campus

Twenty-four modules on two floors, or the same spaces fitted into a rented floor of about 340 m2. Two studios below, project and quiet spaces above.

at a glance

Size and capacity

  • Tier: Business park
  • Modules: 24
  • Floors: 2
  • Floor area: about 336 m2
  • Learners at one time: 84
  • Rooms: 15

Used for. A campus close to employers: core learning, project rooms and a coffee bar. Specialist labs are booked at the flagship.

space schedule

Spaces, modules and seats

Space schedule, Business-park campus
SpaceGroupCountModulesSeats
Open learning studioLearn2860
Reception and loungeWelcome128
Coffee bar and pantryCare116
Washrooms, ground floor, with an accessible cubicleSupport11-
Project rooms (two rooms in three modules)Collaborate1312
Meeting roomCollaborate1210
Silent study areaFocus1212
Open workstation areaWork1218
Staff officeWork112
Store and server roomSupport11-
Washrooms, upper floorSupport11-
Total24128
  • Ground floor holds the busy, public rooms. The upper floor holds the quiet rooms.
  • Two stairs at opposite ends give two ways out from the upper floor. A platform lift gives step-free access.
  • When the campus is fitted into a rented floor, the module grid is kept as a planning grid, so the same element codes and counts still apply.

element list

Coded elements and quantities

Every line uses a code from the element library. No maker is named. Quantities are worked out from the space schedule by the rules of the standard.

Element list, Business-park campus
CodeElementQuantityUnit
CS-SH-01Module shell, 2.4 x 5.8 x 2.9 m24each
CS-SH-02Terrace module with guard rail2each
CS-SH-03Straight stair, single flight1each
CS-SH-04Wide stair, dog-legged or L-shaped1each
CS-SH-05Glass curtain wall panel11.0m2
CS-SH-06Sliding glass door2each
CS-SH-08Access ramp, step-free entrance1each
CS-SH-09Platform lift, one storey1each
CS-IN-03Folding partition30m2
CS-IN-05Floor finish, dry areas294m2
CS-IN-06Floor and wall finish, wet areas42m2
CS-IN-07Fire-exit door with push bar4each
CS-FU-01Linear workstation18each
CS-FU-02Meeting table set, 10 seats1each
CS-FU-03Phone booth4each
CS-FU-04Meeting pod, 4 seats1each
CS-FU-05Library shelf bay2each
CS-FU-06Learner seat84each
CS-SV-01Sub-board, per floor2each
CS-SV-02Cooling unit, per room15each
CS-SV-03Smoke detector and sounder group17each
CS-SV-04Comms cabinet1each
CS-SV-05Solar array, roof14kW
CS-SV-06Emergency light and exit sign group19each

Reference design v0.1. Planning values for teaching and early design. A licensed local engineer and the local authority confirm every real project.

build order

How it is put together

  1. Agree the base, the crane position and the lift order with the engineer.
  2. Place the twelve ground modules, then the stairs, then the twelve upper modules and the two terraces.
  3. Seal the roof, fit the glass walls, doors, rails and the platform lift.
  4. Run services floor by floor: power, cooling, water, drainage, data, fire. Test each before finishes close it in.
  5. Finishes, furniture and signs. Walk every exit route, then hand over with the as-built model.

model files

File names for this build

  • C01-B1-L1-ARC: architecture model, floor 1
  • C01-B1-L1-STR: structure model, floor 1
  • C01-B1-L1-MEP: services model, floor 1
  • C01-B1-L2-ARC: architecture model, floor 2
  • Replace C01 with the number of the real campus. The element code follows when a file holds one element type, for example C01-B1-L1-ARC-CS-SH-05 for the glass wall.

learn with this build

Your project on this campus type

L5 Specialist. Prepare the fabrication model for one stair bay and one terrace of the business-park campus. Link the 24 modules to a build programme and a cost list by element code. Open L5 Specialist

L6 Advanced. Write the BIM execution plan for a new business-park campus in a climate of your choice, then audit a model with planted faults against it. Open L6 Advanced

practice files

Download and open the model

A practice model of this campus type in an open format (IFC), at LOD 200. It holds 24 module shells on 2 floors. Each shell carries its element code, its level of development and the space it belongs to. Doors, walls and furniture are left for you to add.

For learning only. Not a drawing for building.